Home > Products > Travel CPAP Machines
Sort By:
Page of 1
ResMed AirMiniâ„¢ Travel CPAP Machine Disposable Fine Filters (2 Pack) ResMed AirMini™ Travel CPAP Machine Disposable Fine Filters (2 Pack)

The Disposable Fine Filter for AirMini™ Travel CPAP Machine - 2 Pack is a package of two replacement filters for the AirMini™ AutoSet™ Travel CPAP Machine.
These filters are not intended to be washed, but rather disposed of and replaced every 6 months. Check for particle blockage often.
The filter is located below the perforated filter cover on the side of the CPAP travel device.

Our Price: $7.99
ResMed AirMiniâ„¢ Travel CPAP Machine Travel Case ResMed AirMini™ Travel CPAP Machine Travel Case

The Machine Travel Case for AirMini™ Travel CPAP Machine is a hard-shell case that will hold the AirMini™ Travel CPAP. This case will only hold the machine, it will not fit any other accessories.

Our Price: $24.00
ResMed AirMiniâ„¢ Travel CPAP Machine Standard HumidXâ„¢ (3 Pack) ResMed AirMini™ Travel CPAP Machine Standard HumidX™ (3 Pack)

The Standard HumidX™ for AirMini™ Travel CPAP Machine (3 Pack) is a package of 3 HumidX™ waterless humidification units for use with the AirMini™ Travel CPAP Machine from ResMed. This is a three pack of the standard HumidX™ units and does not include any other items.
The standard HumidX™ is for use in normal or humid climates where only a normal amount of moisture needs to be added to therapy air. For dry climates where a larger amount of moisture is needed, the HumidX™ Plus is recommended.
Currently, the HumidX™ units are only compatible with the following AirMini™ mask setup kits:
  • AirMini™ Mask Setup Pack for Airfit™ P10 Nasal Pillow CPAP Mask
  • AirMini™ Mask Setup Pack for Airfit™ N20 Nasal CPAP Mask
  • The HumidX units are not compatible with any other masks, hoses, or machines.

Our Price: $34.00
ResMed AirMiniâ„¢ Travel CPAP Machine HumidXâ„¢ Plus (3 Pack) ResMed AirMini™ Travel CPAP Machine HumidX™ Plus (3 Pack)

The HumidX™ Plus for AirMini™ Travel CPAP Machine (3 Pack) is a package of three HumidX™ Plus units designed to replace the optional waterless humidification element of the AirMini™ CPAP machine.
If used with the AirMini™ during sleep therapy, the HumidX™ Plus sits in the bulbous connection between the two pieces CPAP tubing.
HumidX™ is only compatible with the AirFit™ N20 and AirFit™ P10 masks that are purchased with the AirMini™ device. In order to support the design, the tube and elbow connection differ from the current AirFit™ N20 and AirFit™ P10 masks.

Our Price: $34.00
ResMed AirMiniâ„¢ Travel CPAP Machine Disposable Fine Filters (12 Pack) ResMed AirMini™ Travel CPAP Machine Disposable Fine Filters (12 Pack)

The Disposable Fine Filter for AirMini™ Travel CPAP Machine - 12 Pack is a package of twelve replacement filters for the AirMini™ AutoSet™ Travel CPAP Machine.
These filters are not intended to be washed, but rather disposed of and replaced every 6 months. Check for particle blockage often.
The filter is located below the perforated filter cover on the side of the CPAP travel device.

Our Price: $36.99
ResMed AirMiniâ„¢ Mask Setup Pack for AirFitâ„¢ F20 Full Face CPAP Mask ResMed AirMini™ Mask Setup Pack for AirFit™ F20 Full Face CPAP Mask

The AirMini™ Mask Setup Pack for AirFit™ F20 Full Face CPAP Mask is the unique hose needed to connect the Airfit™ F20 or AirTouch™ F20 Full Face CPAP Masks to the AirMini™ Travel CPAP Machine from ResMed.
This mask setup pack includes the AirMini™ hose and the F20 elbow for use with the AirMini™ machine. Existing users of a F20 mask can use this setup pack to connect the mask to the AirMini™ machine by removing the existing elbow and using the elbow included with this kit in its place.

Our Price: $39.00
ResMed  AirMiniâ„¢  Travel CPAP Machine Bed Mount System ResMed AirMini™ Travel CPAP Machine Bed Mount System

The Bed Mount System for AirMini™ Travel CPAP Machine by ResMed allows the AirMini™ device to be secured to various points such as a bedframe, bedside table, wall, or airplane seat pocket.

Our Price: $39.00
ResMed AirMiniâ„¢ Travel CPAP Machine Standard HumidXâ„¢ (6 Pack) ResMed AirMini™ Travel CPAP Machine Standard HumidX™ (6 Pack)

The Standard HumidX™ for AirMini™ Travel CPAP Machine (6 Pack) is a package of 6 HumidX™ waterless humidification units for use with the AirMini™ Travel CPAP Machine from ResMed. This is a six pack of the standard HumidX™ units and does not include any other items.
The standard HumidX™ is for use in normal or humid climates where only a normal amount of moisture needs to be added to therapy air. For dry climates where a larger amount of moisture is needed, the HumidX™ Plus is recommended.
Currently, the HumidX™ units are only compatible with the following AirMini&trade mask setup kits:
  • AirMini™ Mask Setup Pack for Airfit™ P10 Nasal Pillow CPAP Mask
  • AirMini™ Mask Setup Pack for Airfit™ N20 Nasal CPAP Mask
  • The HumidX units are not compatible with any other masks, hoses, or machines.

Our Price: $59.00
ResMed AirMiniâ„¢ Travel CPAP Machine HumidXâ„¢ Plus (6 Pack) ResMed AirMini™ Travel CPAP Machine HumidX™ Plus (6 Pack)

The HumidX™ Plus for AirMini™ Travel CPAP Machine (6 Pack) is a package of three HumidX™ Plus units designed to replace the optional waterless humidification element of the AirMini™ CPAP machine.
If used with the AirMini™ during sleep therapy, the HumidX™ Plus sits in the bulbous connection between the two pieces CPAP tubing.
HumidX™ is only compatible with the AirFit™ N20 and AirFit™ P10 masks that are purchased with the AirMini™ device. In order to support the design, the tube and elbow connection differ from the current AirFit™ N20 and AirFit™ P10 masks.

Our Price: $59.00
ResMed AirMiniâ„¢ Mask Setup Pack for AirFitâ„¢ N20 Nasal CPAP Mask ResMed AirMini™ Mask Setup Pack for AirFit™ N20 Nasal CPAP Mask

The AirMini™ Mask Setup Pack for AirFit™ N20 Nasal CPAP Mask is a unique hose system used to connect an AirFit™ N20 mask to the AirMini™ Travel CPAP Machine. This setup pack is compatible with the AirMini™ and N20 only, it is not compatible with any other machines or any other masks.
The mask setup pack includes the N20 elbow needed to connect to the AirMini™ hose as well as a standard HumidX™ and a HumidX™ Plus. The HumidX units offer waterless humidification for the AirMini™ machine.

Our Price: $59.00
ResMed AirMiniâ„¢ Premium Carry Bag ResMed AirMini™ Premium Carry Bag

This Product Includes...
1 Carry Bag
1 Shoulder Strap
Product Specifications
Bag Dimensions: 12 in L x 8.75 in W x 3.25 in H

Our Price: $59.00
ResMed AirMiniâ„¢ Travel CPAP Machine 20W AC Power Supply ResMed AirMini™ Travel CPAP Machine 20W AC Power Supply

This is replacement AC power supply for use with the AirMini™ Travel CPAP Machine. This power supply is compatible with only this machine, it is not compatible with any others.

Our Price: $78.95
ResMed AirMiniâ„¢ DC/DC converter ResMed AirMini™ DC/DC converter

The AirMini DC/DC Converter 65W allows you to operate your machine from a vehicle cigarette lighter socket (12V or 24V DC power source) in a car, boat, or other vehicle equipped with a suitable battery. The AirMini DC/DC Converter 65W is specifically for use with the AirMini machine.

Our Price: $89.00
ResMed AirMiniâ„¢ Mask Setup Pack with AirFitâ„¢ P10 Nasal Pillow CPAP Mask ResMed AirMini™ Mask Setup Pack with AirFit™ P10 Nasal Pillow CPAP Mask

The Airfit™ P10 Mask for AirMini is a version of the very popular AirFit™ P10 Nasal Pillow CPAP Mask. This version of the P10 is only compatible with the AirMini™ machine and WILL NOT work with any other machines.
The Airmini™ version of the P10 has specially designed venting to allow proper moisture collection in the included HumidX™ waterless humidification units. This kit includes one standard HumidX™ and a HumidX&rade; Plus. The standard version is for use in normal or humid climates while the Plus version is for use in dry climates.
The AirFit™ P10 Mask Setup Pack for AirMini includes all three sizes of nasal pillows: small, medium, and large. The setup pack includes the standard blue P10 headgear as well as headgear clips.

Our Price: $159.00
Respironics DreamStation CPAP Machine (RX Required) Respironics DreamStation CPAP Machine (RX Required)

PR's DreamStation CPAP Machine has an accessible and user-friendly menu designed to provide alerts and sleep results for CPAP users. Choose from one of the many detailed, setup options to select flex pressure relief, ramp, or OPTIONAL humidification. Download the Respironics' DreamMapper app onto a tablet or smartphone to access nightly sleep results relayed through Bluetooth wireless technology. DreamMapper is available on Apple devices with iOS 6 or newer and Android products 2.2 or newer.
The OPTIONAL DreamStation Heated Humidifier is an add-on designed to prevent dryness and congestion as a result of sleep therapy. Integrate the machine and humidifier to provide warm air to CPAP users. A unique 'Preheat' feature has been incorporated into the DreamStation Humidifier to begin warming the water chamber 30 minutes in advance. Be sure the blower is turned to OFF and the humidifier is connected before selecting this feature.
Tube temperature and humidification settings can be set while the unit is in operation. Use the control dial to make the selections. Also, Adaptive mode can be enabled which will monitor ambient humidity levels and automatically adjust heat settings to provide optimum humidification while helping reduce rainout.
The DreamStation CPAP has a built-in Bluetooth connection which allows the device to pair directly with the PR DreamMapper mobile and web-based program. Enable the Bluetooth feature and download the SleepMapper app onto a smartphone or tablet (not included) to begin reviewing detailed sleep results. Use the free application to begin accessing nightly results through a personalized account on a handheld device. Please Note: The results are only available on one device at a time.
The Ramp feature and SmartRamp feature are both designed to gradually adjust the user to CPAP therapy. Though the Ramp features are similar, there are a few differences between the two options. Ramp is intended to gently increase CPAP pressure from half of the prescribed pressure to the full pressure within a chosen period of time. To operate the Ramp feature, a minimum CPAP pressure of 4cm H2O is required. Choose a time ranging from 5 minutes to 45 minutes to allow the machine to build the pressure in increments of 0.5cm H2O before reaching the prescribed pressure.
In CPAP mode, SmartRamp uses an Auto-CPAP algorithm, making adjustments to the decreased pressure based on a breath by breath basis. Once SmartRamp reaches the prescribed pressure, the device will begin operating as a CPAP machine at the prescribed pressure. Please Note: During SmartRamp, if the minimum pressure is not reached before Ramp is complete, the pressure will increase by 1cm H2O each minute following the conclusion of Ramp.
C-Flex Technology is a pressure relief feature designed for CPAP machines. A range of settings numbered 1 through 3 are established to create varying levels of pressure reduction upon exhalation. Setting 1 is used to apply the least amount of change, while Setting 3 offers the greatest ease upon exhalation.
PR's DreamStation Series was built with a simplistic and practical LCD screen. While the User Interface is in use, the screen is well lit. As the lights in the room are dimmed, the screen's sensor is designed expel the light from the screen. Please Note: The control dial is used to view the menu. The screen does not have touch screen capabilities.
Sleep results are posted on the User Interface to display results and goals for sleep therapy.
The first screen accounts for a "Three Night Summary" which is determined after 12pm on the third day of treatment. Refer to the User Interface to view the results as they update each day.
Daily sleep compliance results are provided after the most recent session. If the user sleeps 4 or more hours, the session is considered successful, rendering a green bar on the right side of the screen. If the user does not reach the anticipated 4 hour mark, the therapy will be noted by a yellow bar in the right corner of the screen.
The second screen is in place for the first 90 days unless the sleep goal is met before the completion of this time. The data details the number of compliant nights recorded over the previous 30 days. A minimum of 21 successful four hour nights is needed to reach the 70% desired goal in order to surpass the screen before the end of 90 days.
Dry Box technology was created to help reduce the chance of water damage when the OPTIONAL humidifier is used with the DreamStation machine. In the instance that water may escape from the chamber, the Dry Box is designed to trap the water within the walls of the unit to prevent water from traveling throughout the machine and humidifier connection. Additionally, the air outlet port uses a one way valve to prevent water from exiting the water chamber and entering the machine. The air outlet port is located on the top of the water chamber to help minimize total water displacement.
System One Resistance Control was developed by Respironics to help their machines reach the optimal pressure by using a numbering system which allows the CPAP device to recognize the mask. It achieves accuracy and reliability by instructing the device to compensate for the specific mask type. Please Note: PR masks are the only masks designed with a resistance control number, so this machine feature is only compatible with Philips Respironics masks.
Scroll through the User Interface using the control dial. The "My Setup" section allows the user to enable a variety of features found on the DreamStation device.
Ramp: Choose the time in which the machine will gradually adjust the user to the prescribed pressure.
Flex: Select between 3 flex settings intended to decrease the pressure upon exhalation.
Humidification: Determine the humidity level by selecting a number from 0 to 5. Level 0 represents humidification that has been turned OFF, while Level 1 is the lowest form of humidity and Level 5 is the most significant level of humidity. Also, the DreamStation Humidifier can deliver different humidification modes: Fixed Humidification, Adaptive Humidification, and Heated Tube Humidification.
Tube Type: Specify the type of CPAP hose being used with the machine. The setting will correspond directly to the diameter of the hose, whether it is 22mm or 15mm. A separate setting can be selected by those using a 15H Heated Tube.
Modem: Use the screen to control the modem. If the modem is switched to OFF, it will automatically turn ON again after 3 days.
Bluetooth: Enable the bluetooth option to transmit sleep data from the machine to a personalized DreamMapper account.
Time: Use this option to change or update the display time in increments of 30 minutes from this screen. The default setting is Greenwich Mean Time.

Our Price: $449.00
ResMed AirMiniâ„¢ AutoSetâ„¢ Travel CPAP Machine  (RX Required) ResMed AirMini™ AutoSet™ Travel CPAP Machine (RX Required)

ResMed's AirMini™ AutoSet™ Travel CPAP Machine is uniquely designed for operation with four ResMed masks. Choose your size in the AirFit™ N20, AirFit™ F20, AirTouch™ F20, or AirFit™ P10 mask, depending on the mask that offers optimal therapy. The AirMini™ runs with minimal white noise sound and offers pressure relief features such as Ramp and EPR. If pairing the device with the AirFit™ N20 or the AirFit™ P10 and their corresponding tube setups, the included waterless HumidX™ unit is the humidification option intended to help provide moisture while on the road.
Features
  • Smallest Travel CPAP Machine
  • Compatible with Popular ResMed CPAP Masks
  • Bluetooth Connection to AirMini™ App
  • HumidX™ Humidification Component
  • Pressure Relief and Auto Start | Stop
  • Portable Travel System Accessories
  • For Use in CPAP or APAP Mode
  • Smallest Travel CPAP Machine
The AirMini™ device weighs 0.66 pounds and measures 5.4 inches long by 3.3 inches wide, making this the smallest RedMed machine available. Pack the AirMini™ in its premium travel bag and or place the device in the travel case and store in your suitcase for ease of travel.
Compatible with Popular ResMed Masks
The AirMini™ AutoSet™ Travel CPAP is intended to operate with four specific masks.
Please Note: Unlike other machines which have universal hoses compatible with any mask, the AirMini™ is only available in package configurations with unique hoses for use with the following masks:
  • AirFit™ N20 with N20 Hose Setup
  • AirFit™ F20 with F20 Hose Setup
  • AirTouch™ F20 with F20 Hose Setup
  • AirFit™ P10 with P10 Mask Setup
  • No other hoses or accessories (including humidifiers) are compatible.
Bluetooth Connection to AirMini™ App
Pair the AirMini™ with an Android or Apple device to view sleep therapy data. The device does not have a screen; therefore, the app has been designed to display important information such as:
30 Day Sleep Score
Usage Hours
Events Per Hour
Leak Rate
Press the Bluetooth button on the front of the AirMini Travel CPAP machine. Scan the barcode with your device's built-in camera or type in the four-digit number on the barcode to begin connecting the machine and personal device (personal device not included). When connecting, a blue light on the front of the machine will blink. Once the connection is complete, the light will stay solid blue for approximately thirty seconds before turning off. Now, you are ready to start exploring your personal sleep data.
HumidX™ Humidification Component
Humidifiers are wonderful additions to CPAP therapy as they provide moisture and can ease side effects from therapy. However, when traveling a humidifier can be a difficult item to pack. ResMed designed the HumidX™ waterless component into the tubing of the AirFit™ N20 and AirFit™ P10 masks for the AirMini™ device. Travel lighter while adding moisture to sleep therapy.
Pressure Relief and Auto Start | Stop
This travel machine has the Ramp feature which allows the user to slowly adjust to CPAP pressure in increments before reaching the prescribed pressure. Automatic Start | Stop has been implemented into the design of this device. Using the device is as easy as carrying it; place the mask on the face and breathe to begin therapy. In order to stop sleep therapy, remove the mask.
This device defaults to Expiratory Pressure Relieve (EPR™) Level 1 which lowers the pressure upon exhalation by 1cm H2O. The user can change the settings to Level 2 which lowers the pressure by 2cm H2O or Level 3 which lowers the pressure by 3cm H2O.
Portable Travel CPAP System Accessories
Unlike many power supplies, the AirMini™ AC power supply is small, measuring 3.5 inches long by 2 inches wide by 1.35 tall. The travel sized humidifier has been eliminated with the addition of the HumidX™ component built into N20 and P10 CPAP tubes.
The AirMini™ premium travel bag and travel case are optional units designed for use with the AirMini™ portable CPAP machine. This bag and case can be added to help protect the machine. Pack the machine in the case, along with the mask, the hose, and all accessories which fit into the bag for easy storage.
For Use in CPAP or APAP Mode
The AirMini™ machine defaults to Auto-Adjusting CPAP mode, but it is designed to work in either CPAP or APAP mode depending on need. In APAP mode, the machine adjusts the pressure based on the prescribed pressure.

Our Price: $880.00