Home > Products > CPAP and BiPap Machines > BiPap Machines
Sort By:
Page of 1
AirCurveâ„¢ 10 VAuto BiLevel Machine with HumidAirâ„¢ Heated Humidifier AirCurveâ„¢ 10 VAuto BiLevel Machine with HumidAirâ„¢ Heated Humidifier W/ ClimateLine Air Heated Tubing  (RX Required) AirCurve 10 ASV with HumidAir and ClimateLineAir Heated Tubing

The AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier uses advanced technology to aim for therapy comfort on many levels. This is an auto bilevel machine with a built in heated humidifier capable of self-adjusting the humidification level based on the temperature of the room.

The machine automatically adjusts inhalation and exhalation pressure on a breath by breath basis while monitoring the length of inhalation breaths and responding to regulate the breathing cycle.

Features

  • AutoSet Algorithm
  • Built In HumidAir™ Humidifier
  • Optional ClimateLineAir™ Heated Tube
  • Pressure Relief Technology
  • Vsync Leak Management
  • TiControl Feature
  • My Options Color LCD Display
  • Light Sensor
  • Advanced Data

AutoSet Algorithm

ResMed developed an advanced algorithm technology for bilevel therapy to continuously monitor breathing in order to adjust the inhalation and exhalation pressure breath by breath. Adjusting the delivered pressure based on the needs of the user increases the comfort of the therapy while maintaining an open airway.

HumidAir™ Heated Humidifier and Optional ClimateLineAir™ Heated Tube

The HumidAir™ humidifier is built into the AirCurve™ 10 machine taking up limited space on a bedside table. Easily adjust the humidification level using the My Options screen on the machine. To set the amount of moisture added to the air stream, select levely 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest. If humidification is not desired, turn the humidifier off entirely.

Pressure Relief Technology

  • EPR™: When the AirCurve™ 10 VAuto is set in CPAP Mode, the machine offers Expiratory Pressure Relief (EPR™) to help therapy feel more natural. ResMed's EPR™ feature adjusts the amount of pressure delivered during exhalation and inhalation. The feature can be turned off, or set to Level 1, Level 2, or Level 3. Level 1 is the smallest change between inhalation and exhalation, while Level 3 is the largest change in pressures.
  • Easy-Breathe: In S Mode, the machine uses Easy-Breathe technology to mimic the user's breathing pattern to help create a more familiar sleep experience.
  • Automatic Adjustments: When placed in Auto Mode only, the machine is designed to automatically adapt the pressure as needed.
  • Ramp: In CPAP Mode, this feature gradually increases the pressure in increments before reaching the prescribed pressure. This is intended to help the user acclimate to the pressure and fall asleep with greater ease. In VAuto, S, ST and T Modes, the expiratory pressure increases from the starting EPAP to the prescribed pressure.

Vsync Technology

Vsync monitors mask leaks throughout the night and compensates by adjusting the baseline pressure to maintain therapy effectiveness.

TiControl Feature

The TiControl feature on the AirCurve VAuto machine monitors the pattern of inhalation and exhalation, comparing it against the TiMax and TiMin settings on the machine. Those with respiratory disorders such as COPD or obstructive lung disease may experience early or delayed changes from inspiration to expiration, referred to as cycling. The 10 VAuto BiLevel TiControl feature is designed to prevent cycling by setting a minimum and maximum time limit on inspiration. When the machine detects the user breathing which falls outside the machine settings, it will intervene to alter the timing of the delivered IPAP (inhalation) or EPAP (exhalation) pressure.

TiControl Settings:

  • Ti Max: Maximum length of Inhalation
  • Ti Min: Minimum length of Inhalation
  • Trigger: Sensitivity level for inhalation trigger
  • Cycle: Sensitivity level for exhalation

IMPORTANT FUNCTION NOTE: The AirCurve 10 VAuto machine does spontaneously regulate the breathing pattern to avoid cycling which results in inefficient breathing. This feature CANNOT be turned off. This machine is NOT a BiLevel ST machine and DOES NOT have a back up rate setting.

LCD Display with My Options

The AirCurve™ 10 VAuto has a color LCD display. The menus are designed to be easy to read and use. Select the menu item on the screen by turning the easy grip dial. Select the My Options menu to view and modify the current settings:

  • Ramp time - Ease into therapy with a period of lower pressure. Or select AutoRamp™ and the machine senses and adjusts when sleep begins.
  • Humidity Level - Set humidity between 1 (lowest) & 8 (highest), or turn it off.
  • Mask Fit - Runs a seal integrity check showing a green smiling face for a good fit or red frowning face for a poor fit.
  • Leak Alert- Set the device to begin beeping when a large leak is detected or the mask is removed.
  • SmartStart™ - Therapy automatically starts when it senses breathing.
  • Mask Type - Set the mask type being used: Nasal; Nasal Pillow; Full Face Mask.
  • Run Warmup - Preheat the humidifier water before starting therapy.

Light Sensor

The AirCurve™ 10 includes an integrated light sensor to adjust the machine screen light level. The sensor reads the light in the room and adjusts the screen brightness automatically. Once the lights in the room are turned off, the machine screen dims. After a few seconds the machine screen goes dark.

Advanced Data

The AirCurve™ VAuto records the therapy information on the machine's on board memory. The data can be downloaded to the included SD card. The machine's on board memory holds compliance information for 365 sessions of use as well as detailed data for 30 sessions.

The AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier uses advanced technology to aim for therapy comfort on many levels. This is an auto bilevel machine with a built in heated humidifier capable of self-adjusting the humidification level based on the temperature of the room.

The machine automatically adjusts inhalation and exhalation pressure on a breath by breath basis while monitoring the length of inhalation breaths and responding to regulate the breathing cycle.

Features

  • AutoSet Algorithm
  • Built In HumidAir™ Humidifier
  • Optional ClimateLineAir™ Heated Tube
  • Pressure Relief Technology
  • Vsync Leak Management
  • TiControl Feature
  • My Options Color LCD Display
  • Light Sensor
  • Advanced Data

AutoSet Algorithm

ResMed developed an advanced algorithm technology for bilevel therapy to continuously monitor breathing in order to adjust the inhalation and exhalation pressure breath by breath. Adjusting the delivered pressure based on the needs of the user increases the comfort of the therapy while maintaining an open airway.

HumidAir™ Heated Humidifier and Optional ClimateLineAir™ Heated Tube

The HumidAir™ humidifier is built into the AirCurve™ 10 machine taking up limited space on a bedside table. Easily adjust the humidification level using the My Options screen on the machine. To set the amount of moisture added to the air stream, select levely 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest. If humidification is not desired, turn the humidifier off entirely.

The OPTIONAL ClimateLineAir™ Heated Tube can be added to the therapy system to optimize humidification. Select the "Auto" function on the AirCurve 10 VAuto to allow the Climate Control system to set for the optimum humidification with minimal rainout condensation. The system considers the temperature of the room air to deliver the optimum level of humidification. Please Note: The ClimateLineAir™ tube is 78 inches in length.

Pressure Relief Technology

  • EPR™: When the AirCurve™ 10 VAuto is set in CPAP Mode, the machine offers Expiratory Pressure Relief (EPR™) to help therapy feel more natural. ResMed's EPR™ feature adjusts the amount of pressure delivered during exhalation and inhalation. The feature can be turned off, or set to Level 1, Level 2, or Level 3. Level 1 is the smallest change between inhalation and exhalation, while Level 3 is the largest change in pressures.
  • Easy-Breathe: In S Mode, the machine uses Easy-Breathe technology to mimic the user's breathing pattern to help create a more familiar sleep experience.
  • Automatic Adjustments: When placed in Auto Mode only, the machine is designed to automatically adapt the pressure as needed.
  • Ramp: In CPAP Mode, this feature gradually increases the pressure in increments before reaching the prescribed pressure. This is intended to help the user acclimate to the pressure and fall asleep with greater ease. In VAuto, S, ST and T Modes, the expiratory pressure increases from the starting EPAP to the prescribed pressure.

Vsync Technology

Vsync monitors mask leaks throughout the night and compensates by adjusting the baseline pressure to maintain therapy effectiveness.

TiControl Feature

The TiControl feature on the AirCurve VAuto machine monitors the pattern of inhalation and exhalation, comparing it against the TiMax and TiMin settings on the machine. Those with respiratory disorders such as COPD or obstructive lung disease may experience early or delayed changes from inspiration to expiration, referred to as cycling. The 10 VAuto BiLevel TiControl feature is designed to prevent cycling by setting a minimum and maximum time limit on inspiration. When the machine detects the user breathing which falls outside the machine settings, it will intervene to alter the timing of the delivered IPAP (inhalation) or EPAP (exhalation) pressure.

TiControl Settings:

  • Ti Max: Maximum length of Inhalation
  • Ti Min: Minimum length of Inhalation
  • Trigger: Sensitivity level for inhalation trigger
  • Cycle: Sensitivity level for exhalation

IMPORTANT FUNCTION NOTE: The AirCurve 10 VAuto machine does spontaneously regulate the breathing pattern to avoid cycling which results in inefficient breathing. This feature CANNOT be turned off. This machine is NOT a BiLevel ST machine and DOES NOT have a back up rate setting.

LCD Display with My Options

The AirCurve™ 10 VAuto has a color LCD display. The menus are designed to be easy to read and use. Select the menu item on the screen by turning the easy grip dial. Select the My Options menu to view and modify the current settings:

  • Ramp time - Ease into therapy with a period of lower pressure. Or select AutoRamp™ and the machine senses and adjusts when sleep begins.
  • Humidity Level - Set humidity between 1 (lowest) & 8 (highest), or turn it off.
  • Mask Fit - Runs a seal integrity check showing a green smiling face for a good fit or red frowning face for a poor fit.
  • Leak Alert- Set the device to begin beeping when a large leak is detected or the mask is removed.
  • SmartStart™ - Therapy automatically starts when it senses breathing.
  • Mask Type - Set the mask type being used: Nasal; Nasal Pillow; Full Face Mask.
  • Run Warmup - Preheat the humidifier water before starting therapy.

Light Sensor

The AirCurve™ 10 includes an integrated light sensor to adjust the machine screen light level. The sensor reads the light in the room and adjusts the screen brightness automatically. Once the lights in the room are turned off, the machine screen dims. After a few seconds the machine screen goes dark.

Advanced Data

The AirCurve™ VAuto records the therapy information on the machine's on board memory. The data can be downloaded to the included SD card. The machine's on board memory holds compliance information for 365 sessions of use as well as detailed data for 30 sessions.

The ResMed AirCurve 10 ASV offers truly personalized therapy for central breathing disorders, such as Cheyne-Stokes respiration and central sleep apnea (including complex sleep apnea) and associated obstructive events. By treating central breathing disorders with auto-adjusting pressure support — and upper airway obstruction with auto-adjusting EPAP — the device works to rapidly stabilize respiration and help improve blood gases.

Integrated Humidification: Heated Humidification is a standard feature built in to all the AirSense 10 Machines. With the Climate Control's enhanced Auto option, simply attach the ClimateLineAir heated tube and press start on your cpap machine to receive the ultimate in therapy comfort.

Easy-Breathe technology: The AirCurve 10 ASV’s Easy-Breathe pressure waveform mimics the wave shape of normal breathing and replicates it to deliver natural breathing comfort.

Connected Care: Every AirCurve 10 Machine comes with built in wireless technology that seamlessly connects to ResMed's new cloud-based management system called AirView. AirView offers the capability to change the device settings and troubleshoot remotely. With this feature, common therapy questions can be resolved in minutes.

ASV Mode: The clinically-published ASV algorithm constantly learns the patient’s unique respiratory rate and delivers pressure matched to patients’ breathing, adapting dynamically to their changing needs.

AutoRamp: ResMed's new AutoRamp feature with sleep onset detection is designated to make therapy as comfortable as possible from the moment you turn on the CPAP machine. It works be delivering a low pressure to help you fall asleep with ease. Once it detects your sleeping, it comfortably increases the pressure to ensure the prescribed level is properly delivered.

Ambient Light: The AirCurve 10 has an ambient light sensor that adjusts the brightness of the screen based on the amount of light in your room. If you need to pause your therapy during the night, the screen will stay dim.

Vsync continuous leak management: technology helps provide patient-ventilator synchrony during leak.

Easy-Breathe motor: The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner. The innovative design Easy-Breathe motor features foam and isolating materials incorporated into the base of the device. It produces minimal turbulence, delivering more performance, and virtually eliminates the noise radiated into the room.

Forward Facing Design: The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.

TiControl: Allows the flexibility set minimum and maximum time limits and fine-tune settings to accommodate various patient conditions.