|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Disposable White Fine Filters for ICON Series CPAP Machines (1 pack) is a single standard filter for the ICON Series CPAP Machines.
|
The Disposable White Fine Filters for Z1 Travel CPAP Machines (1 Pack) is a single disposable filter for use with the Z1 Travel machines: - Z1 Travel CPAP Machine
- Z1 Auto Travel CPAP Machine
This is a single filter only.
|
The Disposable Hypoallergenic Filters for AirSense™ 10, AirStart™ 10, AirCurve™ 10, and S9 Series CPAP Machines (1 pack) is a 1 pack of hypoallergenic filters for the AirSense™ 10, AirStart™ 10, AirCurve™ 10, and S9 Series CPAP Machines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Filter for Transcend Travel Machines is the replacement foam filter for use with Transcend CPAP machines. The filter fits inside the Filter Frame for Transcend Travel Machines. This product works with Transcend machines designed to use the Filter Frame removed by pushing a button. It is not compatible with machines designed with a latch on the bottom of the filter frame. The manufacturer recommends that the Transcend Filter be washed weekly using a 5% mild liquid detergent and distilled water.
|
The Disposable Fine Filter for AirMini™ Travel CPAP Machine - 2 Pack is a package of two replacement filters for the AirMini™ AutoSet™ Travel CPAP Machine. These filters are not intended to be washed, but rather disposed of and replaced every 6 months. Check for particle blockage often. The filter is located below the perforated filter cover on the side of the CPAP travel device.
|
The Diffuser Filter 10 Pack is a 10 pack of diffuser filters for the Pilairo Q Nasal Pillow CPAP Mask. Also included is one diffuser filter cover. This is a ten pack of diffuser filters with cover only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Disposable Fine Filter for DreamStation Machines - 6 Pack is a 6 pack of filters designed for use with DreamStation CPAP machines. These filters are used to block fine particles from entering the CPAP machine from the atmosphere.
|
This is a 6 pack of white fine filters for Fisher & Paykel SleepStyle machines as listed below.
|
These are the original Philips Respironics (OEM) brand ultra-fine filters for the System One, M-Series, and SleepEasy models of CPAP and BiPAP machines. These filters do not have the tab that was on the previous filters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Respironics M Series Machines Disposable White Fine Filters With Tab (6 Pack) is a six (6) pack of disposable fine filters for All Respironics M Series machines.
|
This is the air inlet filter made specifically for the Transcend Travel CPAP Machine and Transcend 'Soft & Wearable' Travel CPAP Machine. It is a foam reusable filter that is easy to clean.The filter should be washed weekly with warm water and dish washing soap then allowed to air dry. The Transcend uses an LED light to signal if the filter needs to be replaced. The filter should be replaced every six months.
|
This is a set of standard filters for the S8 Series CPAP Machines. This filter cleans large particulate matter from the air as it enters the CPAP or Bilevel machine.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a set of standard filters for the S8 Series CPAP Machines. This filter cleans large particulate matter from the air as it enters the CPAP or Bilevel machine.
|
Clean and reuse these filters throughout their lifecycle. To follow the suggested cleaning schedule, wash the filter at least once every other week.
|
10 Pack diffuser filters including the Eson filter cover. The replacement filters measure 2 cm in length x 1.5 cm in width This product is the diffuser filters and cover only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EverGo Air Inlet Particle Filters are reusable filters located in the zippered compartment on the end of the oxygen concentrator. The concentrator should never be used without a filter in place. Respironics recommends washing filters on at least a weekly basis in a solution of warm water and mild liquid dish detergent. Filters must be completely dry prior to insertion into the concentrator case. If the filter appears damaged or dirty it should be replaced.
|
The Standard HumidX™ for AirMini™ Travel CPAP Machine (3 Pack) is a package of 3 HumidX™ waterless humidification units for use with the AirMini™ Travel CPAP Machine from ResMed. This is a three pack of the standard HumidX™ units and does not include any other items. The standard HumidX™ is for use in normal or humid climates where only a normal amount of moisture needs to be added to therapy air. For dry climates where a larger amount of moisture is needed, the HumidX™ Plus is recommended. Currently, the HumidX™ units are only compatible with the following AirMini™ mask setup kits: - AirMini™ Mask Setup Pack for Airfit™ P10 Nasal Pillow CPAP Mask
- AirMini™ Mask Setup Pack for Airfit™ N20 Nasal CPAP Mask
- The HumidX units are not compatible with any other masks, hoses, or machines.
|
The HumidX™ Plus for AirMini™ Travel CPAP Machine (3 Pack) is a package of three HumidX™ Plus units designed to replace the optional waterless humidification element of the AirMini™ CPAP machine. If used with the AirMini™ during sleep therapy, the HumidX™ Plus sits in the bulbous connection between the two pieces CPAP tubing. HumidX™ is only compatible with the AirFit™ N20 and AirFit™ P10 masks that are purchased with the AirMini™ device. In order to support the design, the tube and elbow connection differ from the current AirFit™ N20 and AirFit™ P10 masks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Disposable Fine Filter for AirMini™ Travel CPAP Machine - 12 Pack is a package of twelve replacement filters for the AirMini™ AutoSet™ Travel CPAP Machine. These filters are not intended to be washed, but rather disposed of and replaced every 6 months. Check for particle blockage often. The filter is located below the perforated filter cover on the side of the CPAP travel device.
|
The Standard HumidX™ for AirMini™ Travel CPAP Machine (6 Pack) is a package of 6 HumidX™ waterless humidification units for use with the AirMini™ Travel CPAP Machine from ResMed. This is a six pack of the standard HumidX™ units and does not include any other items. The standard HumidX™ is for use in normal or humid climates where only a normal amount of moisture needs to be added to therapy air. For dry climates where a larger amount of moisture is needed, the HumidX™ Plus is recommended. Currently, the HumidX™ units are only compatible with the following AirMini&trade mask setup kits: - AirMini™ Mask Setup Pack for Airfit™ P10 Nasal Pillow CPAP Mask
- AirMini™ Mask Setup Pack for Airfit™ N20 Nasal CPAP Mask
- The HumidX units are not compatible with any other masks, hoses, or machines.
|
The HumidX™ Plus for AirMini™ Travel CPAP Machine (6 Pack) is a package of three HumidX™ Plus units designed to replace the optional waterless humidification element of the AirMini™ CPAP machine. If used with the AirMini™ during sleep therapy, the HumidX™ Plus sits in the bulbous connection between the two pieces CPAP tubing. HumidX™ is only compatible with the AirFit™ N20 and AirFit™ P10 masks that are purchased with the AirMini™ device. In order to support the design, the tube and elbow connection differ from the current AirFit™ N20 and AirFit™ P10 masks.
|
|
|
