Fisher & Paykel Zest Nasal CPAP Mask with Headgear (RX Required)
The Zest is a nasal cushion CPAP mask from Fisher and Paykel. Incorporating many familiar and some new F&P technologies, this mask is small, quiet and easy to fit.
Part of the FlexiFit family of masks
Glider Strap Anti-Leak System
Glider Clip with One-step Removal
Easy-Clip Silicone Seal
Advanced Aire Diffuser
The Zest Nasal CPAP Mask incorporates the FlexFit two-part cushion assembly. The inner foam cushion helps contour the mask to a wide range of faces and promotes optimal frame alignment. The outer Easy-Clip silicone seal allows for a leak resistant surface and is effortless to remove for cleaning or replacing. The cushion seal is also improved by a more comfortable and breathable elastic Stretchgear Headgear designed to maintain a firm seal through the FlexFit cushion technology.
Experience a greater freedom of movement and improved cushion seal with the Glider Strap. The strap minimizes leak events by distributing pressure points equally along the face when the head rotates from side to side. The Glider Clips and hidden Strap Release make removing a mask easy and prevents a user from the need to re-adjust headgear every time you take off the mask.
A new advanced air diffuser has been added to create a quieter exhalation port. Air is routed away from the user and their sleeping partner and helps minimize exhaust noise.
Fisher & Paykel Zest Q Nasal CPAP Mask with Headgear (RX Required)
The Zest Q builds on the success of the Zest Nasal CPAP Mask only even quieter mask.
- Enhanced air diffuser
- Quiet operation
- FlexiFit technology
- Glider strap
- Headgear and strap release
Fisher & Paykel refined the design of the air diffuser to minimize the sound associated with exhalation. The changes to the air diffuser reduce partner disturbances making for a better night's sleep.
FlexiFit Technology offers an auto-contouring fit using a two-part cushion.The foam cushion provides support and contours to the face while the outer silicone cushion helps to prevent leaks.
The glider strap anti-leak system allows for freedom of movement and maintains the seal, even when turning from side to side.
The Zest Q headgear is designed to offer support and maintain a firm seal while still being comfortable. The glider clip strap release makes removing the mask easy and maintains the headgear adjustments. The headgear of the Zest Q is latex free.
Fisher & Paykel Oracle HC452 Oral CPAP Mask (RX Required)
Fisher & Paykel Healthcare is the first company to develop an oral mask. The Oracle HC452 delivers air pressure only through a mouthpiece. The mask has been clinically proven to treat OSA and offers a viable alternative to a full face mask, with less structure against the face. This is the second generation of Oracle and builds on the original design.
Here is how it works:
The mouthpiece comes in two sizes and is placed behind the lips and in front of the teeth. An outside flap is then fitted into the mouthpiece and folded over the lips. This combination keeps the device stable in the mouth and has been redesigned without the inner flap of the earlier design, which rested on the tongue.
The Oracle mask has an exhalation vent design of a series of small holes and uses a filter to help reduce noise. The mask comes with five filters.
The rotating adjustment dial adjusts the space between the SnapFlap Cover and SoftSeal mouthpiece to increase comfort and stability and can be used after the mask has been fitted into the mouth. This is an upgrade to the earlier design of the Oracle.
One strap around the back of the head keeps the Oracle stable and a swivel in the front of the mask allows free rotation of the CPAP hose. The headgear is adjusted once, then easily removed with just a pull of the Easy-Release cord. No ongoing adjustments are needed. The headgear of the Oracle is latex free, as are all other headgear by Fisher & Paykel.
Fisher & Paykel OPUS 360 Nasal Pillows Mask (RX Required)
The Opus 360 Nasal Pillow CPAP Mask is the redesigned Fisher & Paykel Opus Mask and improves on the original design.
The Opus 360 provides an exceptional amount of freedom in your sleep position while still maintaining a comfortable fit and effective seal. Small and quiet, the slim design allows for almost any sleeping position without the mask becoming dislodged. Its innovative 360 degree pivotal ball and socket elbow connection allows for a great deal of overall adjustability.
Improvements are the Contoured Mask Frame, Anatomically Shaped Pillows, and a Redesigned Headgear.
Here are the highlights of the Opus 360 Nasal Pillows CPAP Mask.
The progressive air diffuser system is very quiet, reducing the amount of noise and draft from the exhaust flow to counteract disturbances to you and your sleeping partner. Light as a feather on your head, the Opus 360 weighs in at just under 2 ounces total weight and its sleek, slim design make it feel like you are almost wearing nothing at all.
Anatomically shaped pillows allow for easy and comfortable fitting and a premium seal. The contours in the new shape and design of the pillows ensures even more comfort.
Much improved, the new headgear has a Hidden Strap Release for simple one step removal for cleaning and it allows you to take it apart and put it back together without the need to re-adjust the straps. The headgear is latex free, as are all other headgear by Fisher & Paykel.
Three dimensional support architecture allows the Contoured Mask Frame to conform naturally to your face which enhances comfort and fit while also providing dependable support. The narrow design permits side-sleeping without the mask being pushed out of place.
Soft-lip cushion provides more in the area of comfort the Silicone Seal is soft on the nose and quite supple where it touches the upper lip. The built-in Soft-Lip Cushion actually conforms to the shape of the upper lip naturally for the utmost in comfort.
You can anchor the tube at the top, side, or leave it free to track. Elegant in design and simplicity, it firmly holds the tube in the desired position and provides stability keeping the mask in place. Alternatively, leave the tube unanchored and the ball and socket joint really comes into play allowing true 360 degrees of freedom.
Fisher & Paykel Forma (RX Required)
The Forma Full Face CPAP Mask with Headgear's full face cushion of the fits under the chin. The cushion comes with highly contoured silicone seal for maximum comfort and stability.
The Forma incorporates a new T-Piece forehead support that provides added stability and auto-adjusts for hassle-free fitting.
The Forma offers enhanced comfort with a greater range of movement due to its new FlexiFoam cushion. The inner foam cushion helps contour the mask to a wide range of faces and promotes optimal frame alignment. The outer silicone seal allows for a leak resistant surface and is soft, light and features advanced active contouring that conforms naturally to the patient's face.
The frame of the Forma is designed to fit all sizes of cushion.
Experience a greater freedom of movement and improved cushion seal with the Glider Strap. The strap minimizes leak events by distributing pressure points equally along the face when the head rotates from side to side. The Easy-Release cord makes removing a mask easy and prevents a user from the need to re-adjust headgear every time you take off the mask.
Finally, a new advanced air diffuser has been added to create a quieter exhalation port. Air is routed away from the user and their sleeping partner and helps minimize exhaust noise.
Fisher & Paykel Eson™ Nasal CPAP Mask with Headgear (RX Required)
The Eson Nasal CPAP Mask and Headgear was created with easy fit and comfort in mind.
Slim Forehead Stability Bar
Ball and Socket Joint
The slim frame of the Eson utilizes RollFit technology which comfortably adapts to movement and reduces pressure by rolling at the bridge of the nose. A ball and socket elbow complements the mask’s lightweight design offering a wide range of movement and a reduction in mask drag.
The forehead bar of the Eson adds additional adaption for the cushion by anchoring the cushion while allowing for movement. The forehead bar holds enough support to help keep the seal from moving too far, but allows enough movement to help maintain a seal during position changes in the night.
The Q Cover diffuser offers a exhalation port unlike any other. A soft foam diffuser covers the air outtake reducing both draft and noise and removes easily allowing for the diffuser to be replaced as needed.
Fit and stability are the hallmarks of the new ErgoFit headgear. Multiple VELCRO® adjustments and clips enable custom tailoring. The crown strap contributes to the headgear’s adaptability and promotes stability. Easy-Clip hooks allow for easy removal and leave adjustments intact.
Fisher & Paykel Brevida Nasal Pillow CPAP Mask with Headgear (RX Required)
The Brevida™ Nasal Pillow CPAP Mask with Headgear from Fisher & Paykel is a lightweight nasal pillow mask designed for comfort and support. The AirPillow™ cushion inflates as air flows through the mask into the cushion and through the nasal passages. The soft walls extend past the nose into the base of the cheekbone to help secure the fit and prolong the seal. VisiBlue™ hues are found throughout the mask to indicate the various connection points on the mask.
The AirPillow™ cushion is minimalistic and triangular in shape, extending from the tip of the nose to the upper lip. The unique geometric shape is designed to create a seal in and around the nose. This concept is unique as most nasal pillow mask seal inside the nostrils only.
The cushion walls are thin, measuring 0.25mm, and they extend out slightly with the intent to create balance against the face and to create a stable seal. For increased stability during inhalation, F&P created an inflatable AirPillow™ nasal cushion, which moves the cushion closer to the nose during inhalation. As the user exhales, the material once again relaxes, allowing for ease of breath at each stage of CPAP therapy.
The Brevida™ nasal pillow mask is designed to accommodate a wide range of facial structures. One cushion is intended to fit up to two sizes: X-Small - Small or Medium - Large, increasing the potential for an accurate fit with fewer attempts to purchase the correctly sized cushion.
The blue hue found on the exterior of the Brevida™ adjustable headgear highlights the thin, dual strap headgear from the thicker beige headgear straps which connect to the headgear clips. The headgear slides over the head and above the ear, with both straps resting softly on the back of the head. The position and fit of the headgear are essential to obtaining a strong seal throughout the night.
If the fit is not optimal once the headgear is placed over the head, the fit can be adjusted by increasing or decreasing the tension on the headgear strap as it slides through the headgear clip.
VisiBlue™ is a unique Brevida™ design element designed to increase visibility of those connections points which are essential to the mask. The headgear, short tube, and swivel all display a blue rim or blue hue highlighting the points by which each piece attach. The short tube connects to the opening in the nasal pillow cushion and the blue rim of the swivel connects to the end of the short tube. Together, these components attach to the CPAP hose whereby pressure is sent from the machine to the mask to the user.
The short tube and swivel connect at the opening in the nasal pillow cushion, creating space between the mask and the CPAP hose. The additional foot of space allows the user more mobility throughout the night, creating a more gentle CPAP experience.
The diffuser cap with filter sits between the mask frame and the short tube, diffusing the sound of the air as it is released from the mask and capturing fine particles. As the filter and cap combination become dirty, functionality may decrease, but the Brevida™ diffuser cap and filter are washable. Clean once a week to prolong the life of the equipment and maintain mask functionality.
Fisher & Paykel Eson 2 Nasal CPAP Mask with Headgear
The Eson 2 Nasal CPAP Mask with Headgear from F&P is an updated version of the Eson nasal mask, which features a slim frame and headgear combination. The RollFit seal is lighter than the previous style and continues to move with the user as sleep positions change in the night. The eco-friendly diffuser is added to the mask in order to reduce noise upon exhalation.
F&P's original Eson Nasal Mask is known for its RollFit seal. The adaptive design glides over the bridge of the nose to accommodate changes in sleep position throughout the night. With attention to helping maintain a strong seal regardless of motion, the mask is intended to prevent leaks and nasal sores. F&P's Eson 2 has a slimmer seal which accommodates various facial structures, helping to create the best fit. The cushion size does not impact comfort, as the design features a more supportive technology.
The Eson 2 features a forehead stability bar which helps provide a more dynamic and secure cushion seal. The bar acts as an anchor for the mask, allowing enough cushion movement to help keep a seal during position changes, but with a secure enough hold to help prevent the cushion from moving too much which could result in leakage.
The Eson 2 Nasal Mask covers less surface than the original design, which was already considered slim. The frame's ease of motion and a secure fit are further advantages of the RollFit technology. Also, the full motion elbow moves in 360 degrees, potentially decreasing issues such as mask drag.
Choose the ideal fit by adjusting one or more of the multiple adjustment points. The forehead support and mask frame attach to four headgear points around the face, while the slim, grey strap found at the crown of the head adjusts to prevent the headgear from sliding in different directions.
After the mask is comfortably positioned, the fit can be maintained even when removing the mask. Two headgear clips found on either side of the base of the frame unhook from the small rods for an easy release.
Eco-Friendly Noise Reduction
A small, grey diffuser is found on the top of the mask elbow. The fibrous fabric is eco-friendly and serves to quiet the device as air releases from the mask. This part is replaceable and can be changed out to aid the longevity of the Eson 2 nasal mask.
ResMed AirFit™ N20 For Her Nasal CPAP Mask with Headgear (RX Required)
The AirFit™ N20 for Her is designed to comfortably adapt and adjust to fit a wide variety of facial types. This For Her version includes violet headgear and is available with a size small cushion. This is a nasal mask which provides therapy through covering both nostrils.
The N20 for Her includes the innovative InfinitySeal™ cushion in size small. The cushion has varying levels of thickness to contour the different parts of the nose to help promote a better seal.
The AirFit™ N20 for Her comes with violet headgear in size small. The headgear is made of plush material for added comfort and helps avoid strap marks. Instead of traditional headgear clips, the N20 has magnetic clips to attach the headgear to the frame. The magnetic clips make it easy to remove the mask, while maintaining headgear adjustments and position.
The frame of the AirFit™ N20 for Her rests on the cheeks under the eyes, leaving line of sight unobstructed for nighttime reading or TV watching. The frame is flexible and adapts to varying facial structures for a more optimum fit. The frame also has integrated padding for additional comfort.
The elbow of the N20 for Her has quick release buttons on both sides to qucikly detach the mask from the CPAP hose. The elbow snaps back into the cushion easily to resume therapy, or for assembling after daily and weekly cleaning.
ResMed AirFit™ N20 Nasal CPAP Mask with Headgear (RX Required)
The AirFit™ N20 Nasal Mask provides various points of adjustment and adaptability with the InifinitySeal™ cushion to help ensure a proper fit is obtained and kept throughout therapy. This is a nasal CPAP mask that provides therapy by covering both nostrils.
The AirFit™ N20 cushion is an adaptive InfinitySeal™ cushion designed to fit and provide a reliable seal to various facial and nasal structures. The cushion has varying levels of thickness to provide a comfortable contact point on the nose, while also allowing a more reliable seal.
The frame of the AirFit™ N20 Nasal CPAP Mask is flexible and soft to the touch. The frame has integrated padding to help avoid irritation, and rests below the eyes to keep line of sight open. The frame is flexible, allowing it to adapt to the user for initial fit and as positions change during the night.
The AirFit™ N20 headgear is composed of soft fabric that helps provide added comfort while helping avoid pressure and marks. The headgear has four points of adjustment, allowing for a fine tuned fit and also provides a quick way to address leaks or other fit issues that may occur during the night. The mask includes a standard size headgear.
ResMed N30 Nasal Mask (RX Required)
The AirFit N30 CPAP Mask is exceptionally quiet and lightweight with a dual-wall nasal cradle cushion that adapts to movements during sleep. AirFit N30's headgear provides gentle stability with minimal facial contact.
AirFit N30's QuietAir woven-mesh venting eliminates exhalation holes found in most masks. Although sharing many similarities to the AirFit P10 Nasal Pillow masks, the AirFit N30 is even quieter.The warp-knitted nylon headgear is elasticated so it gently stabilizes the mask and pulls the pillows into place. A tiny headgear clip can be used to make minor adjustments if needed.The AirFit N30 includes an integrated, flexible short tube that extends off of the mask frame. It is designed to accommodate a wide range of sleeping positions comfortably without mask drag or catching.
The curved cushion of AirFit N30 is compact and soft. It rests under your nose, creating a cradle for a comfortable fit that prevents nostril soreness, nasal discomfort and red marks.
The design requires very little facial contact, has no forehead support, and no hard parts that touch the face.
Respironics ComfortGel Blue Nasal Mask (RX Required)
The ComfortGel Blue Nasal CPAP Mask with Headgear from Respironics offers angled exhalation micro ports to help reducing overall airflow noise. This is a nasal mask and covers only the nose to deliver air flow.
The ComfortGel Blue continues to use a dual, gel cushion and silicone flap system. Respironics has improved the ComfortGel material. The gel is now softer and conforms to your face with greater ease. Use the separate silicone membrane that snaps on, over the gel cushion, to increase the life of the cushion and provides a unique Sure Seal Technology (SST), contouring a seal around the Gel Cushion.
The ComfortGel forehead pad is larger with more cushioning that is easy to fit and improves comfort. The forehead support comes with a StabilitySelector, which is adjustable and allows for movement. The pad attaches to a base that can swivel up or down; accommodating the angle of your forehead.
The new diffusion vent and 360 Degree elbow disperses air softer and quieter than before. Respironics has decreased the overall size of each port, allowing several micro ports to fit on the elbow. The elbow angles the ports away from your bed partner and the micro size diffuses airflow quietly, reducing overall sound.
ResMed P30i Nasal Pillow Mask (RX Required)
The ResMed AirFit P30i is designed to feel more natural, with the tubing connection at the top of the head. The P30i also features QuietAir vent technology which breaks up exhaled air so it spreads out quietly.
The self-adjusting SpringFit Frame adjusts to all different facial sizes. The frame also has built in soft sleeves which rest perfectly on your cheek to help eliminate mask lines.
The low profile frame and tube design gives you the freedom to wear glasses to read or watch TV without blocking your vision.
The AirFit P30i pillows are designed to be interchangeable with the AirFit N30i nasal cradle cushion, offering different options for those that prefer pillow over cushion. The soft dual wall pillows are available in small, medium, and large sizes.
The one-size-fits-all headgear has minimal touchpoints on the face and connects to the frame in the back of the head. The velcro straps can be adjusted and will securely stay in position all night.
Fisher & Paykel Pilairo Q Nasal Pillow CPAP Mask with Headgear (RX Required)
The Pilairo Q Nasal Pillow CPAP Mask with Headgear makes advancements on the already popular and lightweight Pilairo mask. The Pilairo Q is a great option for those looking for a simple yet effective nasal pillow mask.
Two Headgears Included
The Pilairo Q finds stability without the need of a bulky frame or headgear, making it a nasal pillow mask that offers the best seal possible without being cumbersome. There is no forehead support to block bedtime reading or TV watching.
One of the main improvements from the original design lies in the diffuser and exhalation port of the Pilairo Q. An added diffuser helps reduce noise created from air being released through the exhalation ports, providing a better experience for the user and bed partner alike.
The popular one-size nasal pillow from the original Pilairo are featured on the Pilairo Q. The pillow self-inflates when air pressure is provided to the mask, offering the best opportunity for a effective seal to be created at the nasal openings.
Non-Adjustable and Adjustable Headgear
Due to the stable design of the nasal pillows, a simple non-adjustable headgear is included and may be all that is needed to provide a comfortable fit and seal. The Pilairo Q also includes a new adjustable headgear which is included if a more customized fit from the headgear is desired.
ResMed AirFit™ N10 Nasal CPAP Mask with Headgear (RX Required)
The magnetic headgear clips of the AirFit™ N10 Nasal CPAP Mask with Headgear has done just that to many who have seen them. These, along with other features make this a compact, easy to use option. This is a nasal mask which covers both nostrils entirely.
Magnets lie inside the headgear clips and frame of the AirFit™ N10. Once looped through, the headgear is only a snap away from being connected. This makes taking the mask off and placing back on during the night that much easier. Worried about the magnet slipping off while in use? No worries needed, there is a lip on the opposite side of the clip, keeping it in place even under the tightest headgear configurations. The magnets fall under FDA standards as safe for use.
The AirFit™ N10 nasal cushion has a dual wall system which promotes consistency. The outer wall seals while the inner wall stabilizes. It features a clip which is used to quickly release the cushion from the mask frame. The N10 mask is available in two cushion size configurations: standard or wide.
The upper arms of the AirFit™ N10 frame are designed in a curved pattern which hover over the cheeks, allowing for minimal contact with the face. Line of sight is clear with the exclusion of a bulky forehead support. The N10 and N10 For Her both use the same frame and it is compatible with all three sizes of cushion: small, standard, and wide.
The N10 frame has a ring of small exhalation ports which directs the air in various directions away from the user and bed partner. The number of ports provides a quiet experience.
The included SoftEdge™ headgear aims to provide a comfortable, stable fit and promote a proper seal. The softness of the headgear reduces the chance of red marks developing. The headgear can be adjusted at four points for optimal fit. The crown strap which sits on top of the head adds stability to help maintain cushion placement. The AirFit™ N10 headgear is gray on the outer side and light blue on the inner side.
Soft wraps are included with the AirFit™ N10 and are placed over the clear silicone frame. The soft wraps add comfort if the frame should rest on the cheeks while sleeping on the side.
ResMed AirFit™ N10 For Her Nasal CPAP Mask with Headgear (RX Required)
This is a nasal mask which completely covers both nostrils.
The AirFit™ N10 For Her features innovative headgear clips with built-in magnets, making it simple to add or remove the headgear from the frame. The clips have a lip on one side to keep the magnets from sliding off while the mask is in use.
The AirFit™ N10 For Her includes a cushion in size small. The dual-wall design offers support and stability to promote a proper seal as movement occurs during sleep.
The curved upper arms of the AirFit™ N10 For Her frame hover over the cheeks in most positions. If positions change which cause these arms to rest on the cheeks, soft wraps are included to help avoid red marks. There is no forehead support on the N10 For Her frame, leaving the line of sight clear. The N10 and N10 For Her both use the same frame and it is compatible with all three sizes of cushion: small, standard, and wide.
Included with the AirFit™ N10 For Her is headgear with ResMed's SoftEdge™ design which promotes comfort while reducing the chances of marks developing. The headgear's outer side is gray, while the inner side is a soft pink.
The exhalation ports of the AirFit™ N10 For Her form a circle on the frame, allowing air to be directed in multiple directions as to not disturb bed partners or the user. Multiple exhalation ports allow for quiet operations.
ResMed Mirage™ Swift II Nasal Mask with Headgear (RX Required)
The Mirage Swift™ II nasal pillows were redesigned to be thinner and offer a better seal.
The Swift II mask is ultra-quiet and can help improve your sleep and that of your partner as well. The air vent is located on the frame instead of the cushion and disperses air gently downward more in line with natural breathing.
At 2.5 ounces, this mask will not weigh you down. It has a very small footprint that covers less of the face. The pillows rest gently just under the nose. It folds up for easy travel. The minimal design creates comfort and helps users with better compliance and allows for reading or watching TV at bedtime even with glasses on.
An adjustable rotating pillow sleeve allows the user to select the best angle to conform to their unique facial features and helps to create ideal comfort and a superior seal. The pillows, pillow sleeve, and the neck that connect them both are flexible and supple enabling for more comfort and a better fit and for some movement of the nasal and facial features.
The Swift II comes with Small, Medium, and Large size pillows included and fitting is quick and easy. After initial fitting and adjustment the Swift II can be put on without velcro or clips. No need for daily readjustment. The design of the headgear allows for secure placement and fit, improves stability and seal, without the need to over tighten.
ResMed Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear (RX Required)
ResMed has made some substantial design changes to accommodate smaller facial features. After reviewing female patient performance, the length of the headgear backstrap was altered.
The exhalation ports are located on the frame, not on the cushion, allowing air to disperse gently outward and away from the user. This improvement has dampened audible motor whine and airflow noise. Sound levels have been reduced to only 25 decibels at the mask.
Petite, Lightweight, and Travel Friendly Calling the Swift FX 'minimal' is not a fair description. The mask's frame is practically invisible with the pillow cushion connecting seamlessly with the rest of the mask. A set of "lock and key" quick-release tabs secure the silicone headgear straps and allow for easy removal from the frame. The minimal design creates an ergonomic feel and allows for reading or watching TV at bedtime, even with glasses on.
The nasal pillows are designed with dual-wall flaps with improved support and comfort. The cushion's base is outfitted with an integrated flexible chamber that provides stability for side sleepers. This added flexibility accommodates movement and a reliable seal at high therapy pressures.
Made from similar, silicone material found in cushions and pillows, the Swift FX headgear lightly rests on the user's cheeks and quickly feels like nothing is there at all. This streamline design helps foster a sense of freedom and promotes early CPAP acceptance. For an added softness, ResMed has included a set of Soft Wraps, which can be worn around the headgear side straps. The soft fleece material prevents the silicone headgear from slipping and ensures maximum comfort. The minimal design is simple to use, with only 2 points to adjust.
ResMed AirFit™ P10 Nasal Pillow CPAP Mask with Headgear (RX Required)
The AirFit™ P10 Nasal Pillow CPAP Mask with Headgear is the next step in quiet, lightweight nasal pillow masks by ResMed. The AirFit™ P10 is approximately 50% quieter and 50% lighter than the widely popular Swift™ FX. This is a nasal pillow mask which has pillows that provide air to each nostril.
The AirFit™ P10 frame features QuietAir™ woven-mesh vents. This technology quietly directs and diffuses exhaled air in multiple directions away from the user and bed partner. Also included with the frame is a highly flexible short tube. The short tube cannot be detached from the frame.
Three parts comprise the AirFit™ P10: QuietAir™ vent frame, headgear, and nasal pillow. The pillow can be easily added or detached from the assembly using the top and bottom clips. The headgear can also be removed for complete disassembly. The mask weighs approximately 1.6 oz. when assembled.
The QuickFit™ headgear promotes a good fit without the need of Velcro tabs or clips. The elastic fabric headgear is designed to fit snugly. The split back straps can be widened apart for a looser fit or narrowed together for a tighter fit. The AirFit™ P10 features a gray and blue headgear. The gray side is worn facing out, with the blue side facing in.
The AirFit™ P10 dual-wall nasal pillows are designed to adapt to movement. The stems of the nasal pillow easily compress up and down to allow for a comfortable seal to be maintained as sleeping positions change. The pillows feature a lettered size indicator as well as an "L" and "R" to help properly orient the pillows.
ResMed AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear (RX Required)
The ResMed AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear is both quiet and lightweight. It builds on the success found in the Swift™ FX nasal pillow design. This is a nasal pillow mask with the nasal pillows sealing directly against the opening of the nose.
ResMed took a fresh and quiet approach to venting exhalation with QuietAir™. The unique woven-mesh defuses the exhaled air to reduce disturbance to the user or bed partner. The AirFit™ is 50% quieter than the ResMed Swift FX.
The proven seal and reliability featured in the Swift™ FX is found in the AirFit™. The dual wall design supports the seal of the nasal pillow against the opening of the nose. The pillow easily snaps onto the mask frame after cleaning. The AirFit™ For Her includes three color-coded pillow sizes - Extra Small (pink), Small (clear) and Medium (gray).
Pillow orientation is clearly marked with the size indicator and "R" / "L" stamped on the bottom of each nasal pillow set. Additionally, the pillow frame has embossed or raised letter saying RESMED along the top of the frame to help in correct fitting in a darkened room.
ResMed designed the QuickFit™ Headgear in a two toned elastic fabric requiring no fasteners or clips. It features a split strap allowing the user to easily adjust the fit. Spreading the lower and upper strap apart loosens the fit and moving them closer together provides a tighter fit. The gray side of the headgear is worn facing out, with the pink side facing in. The AirFit™ stabilizer frame slides into the button hole on the gray side of the headgear.
The AirFit™ improves on the Swift FX Nasal Pillow mask with a quiet and lightweight design with minimal facial contact. It is made up of 3 parts which are easily cleaned and reassembled. The AirFit™ weighs just 1.6 ounces, 50% less than ResMed Swift FX.
The AirFit™ flexi-tube is allows for ease of movement during sleep without disrupting the nasal pillow seal. The lightweight hose is designed to avoid drag on the mask and limits seal disruption. The flexi-tube is permanently attached to the AriQuiet™ vent assembly. Total hose length, including swivel, is 17 inches.
ResMed Mirage Activa™ LT Nasal CPAP Mask with Headgear (RX Required)
This design accommodates movement during sleep, which results in fewer mask leaks for restless sleepers. The bubble-like membrane surrounding the dual-wall cushion expands and contracts to varying pressures and allows for different sleeping positions during the night. The new ActiveCell membrane is less cumbersome than the original, but still prevents CPAP users from over-tightening the mask headgear to create a secure seal. A looser fitting mask reduces pressure points and prevents red marks.
The MicroFit dial allows CPAP users to find the right fit using 24 small incremental adjustments. The dual-wall cushion and forehead move in tandem as the dial is turned. This design is intended to address difficultly with "first time" fittings and also helps prevent the need to over-tighten headgear.
The Activa LT also comes with a new diffusion vent that disperses air softly and quieter than before. The exhalation ports are configured in a circular design that greatly reduces the audible sound of exhaled air and redirects the airflow away from your bed partner.
The headgear comes with quick clips that allow for fast and convenient removal of the mask without the need to re-adjust.
ResMed Swift™ LT Nasal Pillow CPAP Mask with Headgear (RX Required)
Almost twice as quiet than the original Swift and 71% quieter than the Swift II. The air vent is located on the frame instead of the cushion and disperses air gently downward more in line with natural breathing.
At 2.3 ounces, this mask will not weigh you down. It has one of the smallest footprints that covers less of the face. The pillows rest gently just under the nose. The mask's frame is half the size of both previous Mirage Swift designs. It folds up for easy travel. The minimal design creates comfort and helps users with better therapy effectiveness and allows for reading or watching TV at bedtime, even with glasses on.
Unlike any headgear before, the Swift LT uses a patented rotating barrel to adjust the pillow angle. The stability arms expand to accommodate most facial widths including narrow or wide faces. The fitting is also quick and easy. After initial fitting and adjustment of the Velcro straps, there is no need for daily readjustment.
ResMed Swift™ LT For Her Nasal Pillow CPAP Mask with Headgear (RX Required)
ResMed Swift™ LT For Her Nasal Pillow CPAP Mask with Headgear has Breathe-O-Prene headgear which helps absorb moisture away from your skin. The LT For Her also comes with an adjustable backstrap, which can be worn under a pony tail or accommodate a wide range of hair styles. You can use the ResMed Soft Wraps for additional frame padding and comfort.
Almost twice as quiet as the original Swift and 71% quieter than the Swift II. The air vent is located on the frame instead of the cushion and disperses air gently downward more in line with natural breathing.
At 2.3 ounces, this mask will not weigh you down. It has one of the smallest footprints that covers less of the face. The pillows rest gently under the nose. The mask's frame is half the size of both previous Mirage Swift designs. It folds up for easy travel. The minimal design creates comfort and allows for reading or watching TV at bedtime, even with glasses on.
Unlike any headgear before, the Swift LT uses a patented rotating barrel to adjust the pillow angle. The stability arms expand to accommodate most facial widths including narrow or wide faces. After initial fitting and adjustment of the Velcro straps, there is no need for daily readjustment.
The Soft Wrap is a cloth padding for the Mirage Swift LT mask frame. The package comes with 1 pair, a left and right side wrap. These pads help prevent red marks and discomfort when tightening the headgear.
ResMed Mirage Kidsta™ Nasal CPAP Mask with Headgear (RX Required)
ResMed's Kidsta Nasal Mask is manufactured with Mirage dual-wall cushion technology, thus achieving a better seal. This mask combines performance and comfort, with a non-restricting view. It is specifically designed for children.
- Non-Restrictive View
- Dual Wall Cushion
- Stabilizing Panels and Angle Adapter for stability, optimum seal and comfort.
- Set and Forget it Headgear
- Instruction booklet that is child friendly.
- Click on parts that are easy for a small hands.
ResMed Swift™ FX Nasal Pillow CPAP Mask with Headgear (RX Required)
Small, Lightweight, and Travel Friendly Calling the Swift FX 'minimal' is not a fair description. The mask's frame is practically invisible with the pillow cushion connecting seamlessly with the rest of the mask. A set of "lock and key" quick-release tabs secure the silicone headgear straps and allow for easy removal from the frame. The minimal design creates an ergonomic comfort and allows for reading or watching TV at bedtime, even with glasses on.
The exhalation ports are located on the frame, not on the cushion, allowing air to disperse gently outward and away from the user. This improvement has dampened audible motor whine and airflow noise. Sound levels have been reduced to only 25 decibels at the mask.
The Swift FX nasal pillows are designed with dual-wall flaps with improved support and comfort. The cushion's base is outfitted with an integrated flexible chamber that provides stability for side sleepers. This added flexibility accommodates movement and a reliable seal at high therapy pressures.
For an added softness, ResMed has included a set of Soft Wraps, which can be worn around the headgear side straps. The soft fleece material prevents the silicone headgear from slipping and ensures maximum comfort.
ResMed Mirage™ FX Nasal CPAP Mask with Headgear (RX Required)
The Mirage FX design only has four parts to make cleaning and maintenance easy.The forehead support is designed to easily flex to the needed position for better sleep throughout the night. This design also allows the headgear only and not the plastic to come in contact with the skin.The squeeze-tab elbow makes connecting and disconnecting the hose to the mask a breeze and allows for easy disassemly for cleaning.
This cushion is designed to provide even air pressure through all sides in order to reduce pressure points. The cushion provides extra softness for the bridge of the nose.
ResMed Mirage™ FX For Her Nasal CPAP Mask with Headgear (RX Required)
The Mirage FX For Her is compact and light weight. It allows for easy assembly and disassembly for cleaning. cleaning and maintenance easy: the headgear, the frame, the cushion, and the quick-squeeze elbow. With the new butterfly design, only the headgear comes in contact with the skin.
The cushion is designed to provide balanced pressure through all sides of the cushion in order to minimize pressure points. The cushion provides extra softness at the bridge of the nose to avoid the soreness many encounter.
The soft headgear designed to provide comfort and stay in place through the night.
ResMed Mirage™ FX For Her Nasal CPAP Mask with Headgear (RX Required)
The Mirage FX For Her only has four parts, making cleaning and maintenance easy: the headgear, the frame, the cushion, and the quick-squeeze elbow.
The new design flexes to easily mold to the position for a better fit. With the butterfly design, only the headgear comes in contact with the skin.
The squeeze tab elbow design makes connecting and disconnecting the mask from the hose simple. No more wrestling to find the right snap in the middle of the night, just squeeze the sides of the elbow to release or to connect.
The cushion is designed to provide balanced pressure distribution through all sides of the cushion in order to minimize pressure points. The cushion also provides extra softness at the bridge of the nose to avoid the soreness many CPAP users encounter.
The Mirage FX air vent design allows for quieter and gentler air diffusion, a nice feature for any bed partner.
The soft headgear designed to provide comfort and stay in place through the night.
ResMed Swift™ FX Bella Nasal Pillow CPAP Mask with Headgears (RX Required)
The Swift™ FX Bella Nasal Pillow CPAP Mask with Headgears comes packaged with two unique headgear options and is available in two colors. ResMed responded to patient needs by offering a headgear option that loops around the ears rather than crossing the back of the head.
The very lightweight silicone Bella loops go around the ears to secure the mask in place. Each 'around the ear' loop comes with a set of soft sleeves to cushion contact with the cheeks and face. The 'around the head' headgear for the Swift FX Bella is an update to the headgear that was introduced with the Swift FX. It is an incredibly lightweight, soft, silicone-based headgear that rests lightly on the cheeks offering a sense of freedom. It is made of silicone similar to the material used in mask cushions and pillows. A set of Soft Wraps to cushion the headgear against the face is included with the Bella. The updated headgear is compatible with the original Swift FX.
The air disperses gently outward and away through exhalation ports located on the frame not on the cushion, dampening audible motor whine and airflow noise. Sound levels have been reduced to only 25 decibels at the mask.
The Swift FX nasal pillows are designed with improved support and comfort using dual-wall flaps. Side sleepers will appreciate the cushion's base that is outfitted with an integrated flexible chamber that provides stability. The flexibility accommodates movement and offers a reliable seal.
Fisher & Paykel Simplus Full Face Mask (RX Required)
The design of the Fisher & Paykel Simplus Full Face CPAP Mask with Headgear minimizes weight and complexity for full face mask users. This full face mask delivers the air flow to both the nose and mouth for those whose mouth drops open during sleep.
The Simplus is made of 3 main parts: Frame, Headgear and Cushion. Having minimal components provides a mask that is easy to adjust while in use, or maintain when it is not. Simplicity is at the heart of the Simplus and the lightweight design enhances sleep comfort.
- Forehead Stability Bar-Instead of a bulky forehead piece found on other masks, the Simplus uses a slim forehead stability bar which acts as an anchor for the cushion's seal. The stability bar helps the cushion better keep an adequate seal by allowing the cushion to move enough to adapt as positions change during the night, but provides enough support to help prevent movement of the cushion that would cause a complete break in the seal.
- Lightweight Frame with Easy Clip-The frame of the Simplus is notably straightforward but remains effective. The "Easy-Clip", which is a single clip to lock the cushion, makes it a cinch to separate the mask for cleaning. The ball and joint elbow moves freely to accommodate active sleepers. Any size Simplus cushion can be used with the Simplus frame.
- ErgoForm Breathable Headgear-The headgear for the Simplus is comfortable and allows for movement. The breathable headgear adjusts using the Velcro tabs and removes easily using the headgear clips. In order to promote stability while adapting to change, sections of the headgear stretch while some stay in place. The Simplus headgear accommodates the need for different sizing with two sizes: Small and Medium/Large. A Small Simplus is packaged with Small headgear. A Medium or Large Simplus comes packaged with Medium/Large Headgear. To offer a wide range of adjustment, there are 5 points on the headgear that can be changed: on both headgear clips, on either side of the forehead support, and on the top buckle.
- Simple Cushion with RollFit Seal-As the name suggests, the RollFit Seal rolls on the nose and allows the cushion to shift but still maintain a seal. This feature results in less stress on the bridge of the nose. A one-click design makes for easy removal and placement of the cushion on the mask. There are three sizes of cushion available: Small, Medium and Large. If a different size is needed, no need to order a whole new mask, a replacement cushion in the new size can be ordered and placed on the existing frame.