ResMed Swift™ FX for Her Silicone Headgear Assembly
The design is minimal and simple to use, with only 2 points of adjustment. A low-profile backstrap and a buckle on top. The backstrap is Lycra-based material with Velcro fasteners. The top buckle for the headgear uses a set of notches for easy adjustment. This streamline design helps with a sense of freedom and promotes early CPAP acceptance.
For additional comfort use ResMed's Soft Wraps, which can be worn around the headgear side straps. The soft material prevents the silicone headgear from slipping and ensures maximum comfort.
ResMed Airfit™ N30 Frame Assembly Without Headgear
The AirFit N30 CPAP Mask is exceptionally quiet and lightweight with a dual-wall nasal cradle cushion that adapts to movements during sleep. AirFit N30's headgear provides gentle stability with minimal facial contact.
The curved cushion of AirFit N30 is compact and soft. It rests under your nose, creating a cradle for a comfortable fit that prevents nostril soreness, nasal discomfort and red marks.
AirFit N30's QuietAir woven-mesh venting eliminates exhalation holes found in most masks. Although sharing many similarities to the AirFit P10 Nasal Pillow masks, the AirFit N30 is even quieter.
The AirFit N30 includes an integrated, flexible short tube that extends off of the mask frame. It is designed to accommodate a wide range of sleeping positions comfortably without mask drag or catching.
The frame assembly does NOT include headgear.
ResMed Mirage™ FX Nasal CPAP Mask Assembly Kit
This is the Mirage™ FX nasal mask frame with one size cushion. This product does not include the headgear which can be purchased separately: Headgear for Mirage™ FX Nasal CPAP Mask.
Featuring the dual wall Spring Air™ cushion, the aim of the Mirage™ FX is to reduce pressure points on the face. The air exhalation ports provide a gentle air stream that is quiet and less likely to cause discomfort to the one using the mask or a bed partner.
Reducing the number of parts, ResMed has made the Mirage™ FX ResMed easy to use and clean. The squeeze-tab elbow snaps on and off without using clips.
AirFit™ N30i Frame System Without Headgear
Sleep the way you want with ResMed AirFit™N30i. Featuring a top-of-the-head tube design and a nasal cradle cushion that sits comfortably under the nose, you can sleep in any position. No front tube means the mask stays out of sight and out of the way. The SpringFit frame adapts for a personalized fit and features a quick-release elbow that makes it easy to disconnect mask from tubing allowing for easy cleaning.
ResMed AirFit™ P30i Frame Assembly Without Headgear
This is the perfect solution for those of you who want to replace the main portion of your existing mask without having to buy a whole new complete kit.
The ResMed AirFit P30i is designed to feel more natural, with the tubing connection at the top of the head. The P30i also features QuietAir vent technology which breaks up exhaled air so it spreads out quietly.
The self-adjusting SpringFit Frame adjusts to all different facial sizes. The frame also has built in soft sleeves which rest perfectly on your cheek to help eliminate mask lines.
The low profile frame and tube design gives you the freedom to wear glasses to read or watch TV without blocking your vision.
The AirFit P30i pillows are designed to be interchangeable with the AirFit N30i nasal cradle cushion, offering different options for those that prefer pillow over cushion. The soft dual wall pillows are available in small, medium, and large sizes.
The one-size-fits-all headgear has minimal touchpoints on the face and connects to the frame in the back of the head. The velcro straps can be adjusted and will securely stay in position all night.
ResMed Mirage Swift™ II Nasal Pillow CPAP Mask Assembly Kit Without Headgear
The Swift II mask is ultra-quiet and can help improve your sleep and that of your partner as well. The air vent is located on the frame instead of the cushion and disperses air gently downward more in line with natural breathing.
At 2.5 ounces, this mask will not weigh you down. The pillows rest just under the nose. It folds up for easy travel. The minimal design creates comfort and allows for reading or watching TV at bedtime even with glasses on.
An adjustable rotating pillow sleeve allows the user to select the best angle to conform to their facial features and helps to create comfort and a better seal.
This package DOES NOT include Headgear.
ResMed AirFit™ P10 Nasal Pillow CPAP Mask Assembly Kit
The AirFit™ P10 Nasal Pillow CPAP Mask Assembly Kit is the Mask Assembly Kit for the ResMed AirFit™ P10. This is the mask only with a single pair of nasal pillows. This does not include the headgear for the AirFit P10 mask.
The nasal pillows for the AirFit™ P10 have a color coded rim by size.
Extra Small (Pink)
The AirFit™ P10 is made up of only three parts: vent frame, headgear (not included with this product), and nasal pillow. The pillow is easily removed and re-assemble using the top and bottom clips on the pillow rim.
Attached to the frame is a highly flexible short tube. It allows for movement during sleep while limiting disturbance to the seal. The short tube cannot be detached from the frame.
The dual-wall nasal pillows are available in four sizes: XS; S; M; L. The pillows are designed to adapt to movement, the stems of the nasal pillow compress to allow for a comfortable seal that is maintained during position changes. The pillows feature a lettered size indicator as well as an "L" and "R" to help properly orient the pillows.
Fisher & Paykel Vitera Full Face Mask Assembly Kit
The Vitera is the next generation full face mask from Fisher & Paykel!
The Vitera Full Face Mask is designed to help stop leaks with a flexible cushion that permits you to move around and find the most comfortable spot on the bed. The Vitera's Rollfit XT cushion, is designed to be flexible enough to tolerate movement in almost any direction. The Rollfit XT cushion will move with you and help keep the seal secured in the process. Extra forehead support will provide extra stability during the night and keep the cushion secure, even as you move in your sleep.
Breatheable headgear uses Venti-Cool Technology to Keep You From Overheating The Fisher & Paykel Vitera uses mesh patterned elastic headgear to allow air to easily pass through, keeping you from overheating during the night.
The Vitera is designed to handle pressure settings from 4 all the way to 30. No matter what pressure you need, your Vitera can accommodate it. Vitera is made with high pressure users in mind!
The Frame Assembly comes WITHOUT the headgear
ResMed AirFit™ F30i Full Face Mask Frame Assembly (No Headgear)
The ResMed F30i Full Face CPAP Mask takes your comfort to a new level, providing a stable cushion that covers your mouth and seals under your nose. Designed to provide the ultimate flexibility to sleep in any position without worrying about kinks and tangles.
With no bulk near the front of the mask, you'll be able to comfortably sleep in almost any position. Whether you prefer sleeping on your stomach, back, or side, this mask is designed to handle these positions by providing extra support to the cushion.
Your hose connects to the F30i on the top of the head, allowing the swivel to rotate a 360 degrees for maximum range of motion so your hose won't kink or tangle.
You'll be able to comfortably wear glasses again with the wide-open view afforded by the ResMed F30i. It can also help eliminate feelings of claustrophobia and may reduce your anxiety.
Disconnect from your CPAP hose quickly and effortlessly, thanks to the Quick-Release Elbow found on the AirFit F30i. One simple touch is all it takes to separate the hose from your mask.
The silicone frame is designed to be gentle while and to make minimal contact with your face. You'll also appreciate the next-generation UltraCompact mask cushion, which doesn't cover the bridge of the nose.
The F30i only comes with a few parts: the elbow, hollow frame, headgear, and cushion. It eliminates the need for an extra tube or extra parts, so there's less to worry about, clean, and maintain.
The RedMed AirFit F30i Frame Assembly comes WITHOUT a headgear
ResMed AirFit™ F30 Full Face Mask Frame Assembly (No Headgear)
The ResMed AirFit F30 Full Face Mask Frame Assembly (No Headgear) contains the following:
1 Quiet Air Elbow
This mask secures in place at 4 points along the frame eliminating the forehead contact completely. The Quiet Air Elbow works as a noise diffuser, spreading the exhaled air across a wider area. Many experience fewer red marks and enhanced comfort levels because of the mask design which reduces nasal bridge discomfort with its ultracompact mask cushion. The ultra-compact ResMed AirFit F30 cushion design offers an improved field of vision with almost no obstructions.
Respironics Amara Full Face Mask Frame Assembly
The Amara Full Face Mask is available with a gel or silicone cushion. Both cushion types offer a dual wall design which provides a comfortable, stable seal.
The silicone cushion offers a traditional seal. The gel cushion features the comfort and contoured fit for which gel is known.
All size cushions in both gel and silicone are compatible with the Amara frame and headgear. The cushion snaps on and off the frame easily for cleaning and changing cushions. The cushion seal is attached to a clear, one piece shell. The cushion shell is removed and replaced with a single click onto the mask frame and elbow assembly.
The Amara features Respirionics micro exhalation ports found in previous masks. The number and size of the ports allows for quiet operation and directs airflow away from the user.
All sizes and types of Amara cushions work with the Frame. The single click design of the Amara allows the cushion to be changed easily. To replace, align the port on the front of the cushion with the elbow on the inside of the frame and push until there is an audible click. Headgear and frames from the previous version are also compatible.
The headgear does NOT come with the frame assembly
ResMed Quattro™ FX Full Face CPAP Mask Assembly Kit
ResMed has re-engineered the Quattro with the Quattro FX Full Face Mask and comfort in mind. The overall size and design is ideal for side sleepers, with a clear line of sight and fewer points of contact. The Quattro FX comes with Spring Air technology that enables the cushion and frame to be responsive and flexible, while providing a solid base for the cushion to seal properly. Some of the best features from the original Quattro have carried over.
The overall design of the Quattro FX creates a secure seal without the forehead support. Eliminating the forehead support means fewer points of failure and an end to red marks on your forehead. Without a forehead support, you will also enjoy a clear line of sight for viewing television or reading a good book in bed.
The Mirage series of CPAP masks provide superior cushion design through the incorporation of two cushion layers. The dual-walls consists of an inner, supportive layer that stabilizes the cushion and a softer, outer membrane that reduces the likelihood of leaks and pressure sores. As air flows through the cushion, the outer membrane rolls and inflates around the nose rather than stretching over it.
This product does NOT include a headgear.